Monday, July 6, 2009
Lace wig vendors
Measuring you head for lace Front
Helpful Hints for taking good measurements:
1.) Use a cloth measuring tape.
2.) Measure holding the tape snug, but not tight against the head.
3.) Keep tape flat against your head and do not allow kinks or twists to develop in the tape.
4.) Take measurements at least 3 times to be sure. Consistent measurements are an indication that you are measuring correctly.
5.) Braid, Wrap, or lay your hair how you plan to wear it
under the wig before measuring your head for your wig.
1) Measure your head Circumference with a tape measure around your hairline.
Circumference: This measures the distance around your head. Starting at the center of the front hairline, place the tape flat against your head, going just above the ear towards the back of the head, keeping the tape at the nape of your neck and go around to the opposite side of your head, just above the opposite ear and returning to the center of the front hairline. Circumference = _______ inches
2) Measure Front to Nape
Front to Nape: This measures the length of your head from the front to the nape of your neck. To determine where the nape of your neck is, tilt your head back and look up. Where your neck bends and may even develop a skin fold, is where your nape is. You want the bottom of the wig to sit right above this area so that when you do tilt your head back that far, your wig will not shift on your head. This area is often right at the occipital bone, but be sure to take the measurement with your neck bent down so that you are looking at your shoes. Starting at the front hairline, measure directly across the middle top of your head to the area that you have determined is your nape. Front to Nape = ____ inches.
3) Measure from Ear to Ear Across
Place tape at your temple, just in front of your ear, bring tape up towards the top of the head and go 1.5 inch behind the front hairline, down to the opposite temple in front of the opposite ear. Temple to Temple = _____ inches.
4) Measure from Ear to Ear Over Top of Head
Ear to Ear Across Top of Head: This measures your head for the top of the wig base. Place tape against your head at the top edge of your ear and go directly across the top of your head to the top edge of the opposite ear. Ear to Ear = _____ inches.
5) Measure from Temple to Temple Around the Back of
Nape: The measures the width of the hair at the nape of your neck. Place tape at the end of your hairline at the nape and measure across the width of the hair. If you want more room at the nape, you may want to consider adding a half inch to your nape measurement. Nape = _____ inches.
Lace Front
If you feel uncomfortable with a vendor, go with your first mind. You normally can never go wrong. If you've ever been to a trade show or intend on going to one-it's a great idea if it's free. Don't go to any show that obligates you to buy a unit from them,
When I ordered my first wig, I was soo impatient. It was a stock unit and I did not take time with it . I still have the unit, but I made mistakes due to me wanting it soo bad and wanting to put it on right away without the time or proper tools need it. Relax-your beautiful without it anyways…:)
You have already taken the first step here by purchasing this information. Read up on different techniques, vendors, and decide if lace wigs are for you. It's a process of trial and error. If you like things to be perfect right away, then maybe this isn't for you. That is unless you have a professional apply it for you EVERY TIME. That can get quite expensive!
These normally turn out to be the units that you fall in love with because they are made to your specifications. Stock wigs are good also, but make sure you do good measurements. You don't want to get a wig that covers half of your lovely head!
Most lace front units can last from 6-months to more than a yr with everyday wear if you provide it with love and care. You go the salon and pay for your hairdo, you wrap it up and try to maintain the hair, don't you? Do the same with your wig!
What is your own personal style? Do you like curls, thick hair, straight hair? Chinese remy is really good for straight styles but do not hold curls well. Indian hair hold beautiful curls but does not hold straight styles well. Keep this in mind when ordering and choosing your density. Light density with a gradual fade to Medium is the most popular/natural. I happen to like thick full, "Diva" hair, so I choose Medium to heavy in regards to density. Light to light is a NO NO…..unless your going for that thin hair look. NOT! LOL.
Swiss lace cap is more realistic and it is thinner. Swiss is good for realistic parts also. French is more durable. I have found that Swiss lace is not at all that fragile. I have Swiss and I tug and pull on my wig all the time. A lot of sites, recommend French for beginners, I was a beginner with Swiss and I did just fine. Especially with my heavy hands!
8. To Bleach or not to bleach??
BLEACH!! PLEASE! This is important if you want the hair to look as realistic as possible. The knots on the wig should always be bleached.
Sunday, July 5, 2009
How to apply a lace front wig/unit.

In need of a new hair style in a hurry ? Ok, you have this lace front wig and your not sure what to do with it. Don't panic, I'll walk you through step by step.
Things You'll Need:
- lace front wig
- rubbing alcohol
- scalp protector
- lace wig glue
Step 1: Clean your forehead area with soap and water to remove any oils etc. Next you want to take a cotton ball with alcohol on it and wipe from ear to ear around front hair line to further remove any oils. Once the alcohol dries apply your scalp protector which helps with adhesion.
Step2: Put your lace wig on and make sure the wig sets correctly around the hairline and is even on both sides of the ear.
Step3:Cut the front lace along the side of the forehead line right next to the hair line where you can see the hair line on the wig, start cutting from the bottom of one side to the center of the forehead line and repeat from the other side.
Step4:Take wig off and start applying bonding glue on the forehead skin where the lace front is to be attached. Before you put the wig back on, make sure the glue is completely dry.
Step5:Put wig on, make sure it sits properly on your head.
Step6:Press down lace part onto the bonding area from one side to the otherwith the back end of the comb.
STEP7: To remove lace front apply alcohol on a cotton ball and press and hold the cotton ball along the the hair line to break down the glue. or you can purchase glue remover .
Wednesday, July 1, 2009
Facial Brightener: The Benefits of Using a Facial Brightener
There are many advantages for your complexion for using a facial brightener
Achieve a radiant complexion by using a facial brightener – one of the best anti-aging products on the market today. A facial brightener works to highlight skin by using a combination of pigment-lightening agents to give skin a youthful glow. Read on to find out all the benefits of using a facial brightener in your daily skin care regimen.
Facial Brightener Reduces the Appearance of Dark Areas
As skin ages, it can become duller and less vibrant. Using an anti-aging facial brightener is a great way to even out skin tone and get it looking flawless and glowing once again. Incorporate a facial brightener into your daily skin care regimen and see an improvement in your complexion’s color and brightness. By fading other skin discolorations that you may be concerned about like age spots and freckles, a facial brightener can give you a more youthful radiant look.
Facial Brightener Can Cover Flaws
Although using a facial brightener cannot remove fine lines and wrinkles, they do an excellent job in covering and dramatically reducing their appearance thereby making fine lines and wrinkles virtually invisible. A facial brightener returns a youthful glow to skin by restoring a smooth appearance to skin’s surface and brightening skin’s color, allowing you to use less makeup.
Facial Brightener Delivers Results
By adding a facial brightener to your every day skin care routine, you may see results in as little as a few days. After cleansing skin, gently massage a facial brightener over the areas of the face that you want to brighten, wait until it absorbs into skin then apply your face moisturizer. It is important to remember if you are going to be in the sun for a long period after applying your facial brightener, then you should apply a face cream that contains a high SPF factor to protect skin against harmful UV rays.
Find facial brightener and other anti-aging skin care products on AloetteWhat is Hyper pigmentation?
Inside our skin are cells called melanocytes which produce the pigment melanin. Melanin is what gives our skin its color and more importantly protects our skin from the sun's UV radiation. When the skin is exposed to the sun, its natural defense is to create more melanin, causing an overall darkening or tanning. While tanning is considered natural and often associated with beauty, the side effect of excessive tanning is often not as pretty.
When the skin becomes damaged, either by too much sun, an external injury or by some internal cause, it can respond by creating excessive pigment and forming a pronounced dark spot or discoloration. These discolorations are referred to as hyper-pigmentation and can come in the form of a dark age spot, scars, or brown/red patches on the skin. Hyper-pigmentation can also be caused by many different medical illnesses such as Addisons and Cushings disease, Melasma, Linea Nigra, Tinea, Celiac Disease and more. For this reason, it is important that a doctor fully diagnose the individual before he/she attempts to treat just the cosmetic symptoms.
Hyper-pigmentation can often be successfully treated with the use of skin lightening creams. Many of these creams contain an ingredient called hydroquinone which is a chemical skin lightener that can be used in various concentrations ranging from 2%-10%. Over the counter hydroquinone creams are available in a maximum of 2% concentration.
For concentrations higher than 2%, a prescription is required. Many of these prescription strength products also combine the hydroquinone with Tretinoin, which helps to significantly increase cell turnover. Some individuals prefer not to use hydroquinone and instead opt for more natural skin lighteners that use proven ingredients like Kojic Acid or Arbutin. . In some cases, laser treatment may be also be effective.
The sun is the worst enemy of hyper pigmentation. Without proper sun protection, it is nearly impossible to expect successful treatment. Sunscreens and protective clothing go a long way in the treatment and prevention of most types of hyper pigmentation.
Tuesday, June 30, 2009
How to put on Foundation So No One Knows It's There.
Step1: PICK THE RIGHT TYPE
Choose a formula made for your skin (at right the newest kinds.)
If your dry,try a moisturizing one; powder may seem ashy, Oily?
Look for "oil-free on the label.
Step2: Get A PERFECT SHADE
Fist off, ignore the actual color names.
Test foundation on your jaw line- the skin on your hand is different tone.
Do stripes of several shades, view in natural light and pick the one that disappears into skin. "Can't try before you buy? Many drugstores let you exchange opened makeup.
Step3: APPLY IT LIKE A PRO!
For powder, brush it on in little circles with a foundation brush. Start with you nose, working out to the edges of your face. For creams and liquids, put on with fingertips. Their warmth makes it easy to apply a thin layer. Use a brush, since fingers can transfer oil.)
Smooth on moisturizer first.
Applying it five minutes before foundation gives
you more natural looking ,dewy finish.
from your jaw to avoid a telltale line.
Dab onto spots on your chest, too,if you'd like.
Finish with powder.
Dust a translucent one over liquid or cream
foundation for stay-put power.